English
中文简体
Español
русскийMar 07,2024
Flange Nuts are nuts, parts that are screwed together with bolts or screws for fastening. All manufacturing machinery must be used as an original. Flange Nuts are parts that tightly connect mechanical equipment. Through the inner threads, Locknuts and screws of the same specification can be connected together. The following China Flange Nuts Manufacturers will introduce you in detail 4 ways for locknuts to avoid slipping and loosening.
The relative rotation of the lock nut pair is directly limited by the lock nut stopper. Such as the use of opening pins, series steel wires and stop washers, etc. Since the lock nut stopper has no pre-tightening force, the anti-loosen stopper can only work when the lock nut is loosely retreated to the stop position. Therefore, the lock nut is not actually loosened but prevented from falling off in this way.
After tightening, punching, welding, bonding and other methods are used to make the lock nut pair lose the characteristics of the moving pair and the connection becomes a non-detachable connection. The disadvantage of this method is that the bolt can only be used once, and it is very difficult to disassemble, and the bolt pair must be destroyed before disassembly.
This is the most widely used anti-loosening method. This method generates a positive pressure that does not change with the external force between the lock nut pairs to generate a frictional force that can prevent the lock nut pairs from rotating relative to each other. This positive pressure can be achieved by compressing the lock nut pair axially or simultaneously. For example, elastic washers, double nuts, self-locking nuts and insert lock nuts are used.
After the Flange Nuts are tightened, the punching point at the end of the thread destroys the thread; the anaerobic adhesive is usually used to apply an anaerobic adhesive to the threaded surface, and the adhesive can cure by itself after the locknut is tightened, and the anti-loosening effect is good. The disadvantage of this method is that the bolt can only be used once, and it is very difficult to disassemble, and the bolt pair must be destroyed before it can be dismantled.
Measurement system:Imperial (Inch), Metric
Application:
Automotive Industry, General Industry, Heavy Industry, Mining, Oil & Gas, Retail Industry
Place of Origin:China
Standard:DIN
Name:Flange Nut
Size:M3-M24
Available Material:High strength Carbon Steel
Package:Carton
Sample:Free
Stock Code: 000906